From the category archives:


Motorcycle Safety Then and Now

by Jeff on January 6, 2013

Words By Noble McIntyre
Photos By Jeff Cobb

Motorcycles have always evoked an image of freedom, individuality, and as the case may be, rebellion. With that freedom, there is also the possibility of an injury.

Motorcycle safety has evolved significantly over the years and the rudimentary helmet and classic leather jacket have been replaced by modern materials.


Interest in developing motorcycle helmets began in 1935, when T.E. Lawrence (better known as Lawrence of Arabia) suffered a fatal motorcycle crash. His neurosurgeon, Hugh Cairns, began the research that would eventually lead to the development of the motorcycle crash helmet. The first patent for a motorcycle helmet was submitted in 1953 by Professor C. F. “Red” Lombard.

Riding is risky enough and racers know not to take excessive chances with their gear; their tech is continually trickling down to street riders. (Click on photos to enlarge.)

The earliest helmets were made of leather, which didn’t do much in the way of impact protection, but did prevent abrasions and “road rash.” Later helmets changed radically in design and materials — in the 1960s, safety helmets had exteriors made of fiberglass, and interiors lined with polyurethane foam or cork. Most modern helmets are made from plastic, carbon fiber or Kevlar, and are designed to be impact and puncture resistant.

While the earliest “three-quarters” helmets had an open face, and were designed primarily to protect the skull, later helmet designs incorporated full face protection, and “flip-up” visors. Some helmet designs, like those used by motocross racers, cover the head entirely.

Protective Gear

The right gear is considered one of the most important aspects of motorcycle safety, next to awareness, and rider training. The earliest motorcycle “gear” grew out of the use of motorcycles in the military during World War I. Short coats replaced dusters so they wouldn’t get caught in motorcycle spokes, and heavy boots and pegged breeches protected the legs. While it might have been functional, it wasn’t terribly stylish.

The most recognizable motorcycle gear is probably the leather jacket, first made famous by Marlon Brando in the film The Wild One. While a simple leather jacket can help protect from abrasions, modern protective gear may be made of sufficiently thick leather or with ballistic nylon or Kevlar, and some have carbon fiber armor on major impact points, such as the shoulders, elbows and knees. Some high-end motorcycle jackets and race suits even have a built-in airbag system, which inflates to protect the neck and torso. There are also street oriented airbag vests that inflate when a rider has a sudden get-off from his or her machine.

Full abrasion-resistant and armored textile street gear (Lee Parks Total Control street riding instruction shown).

Believed by some to be even more durable – but with limited actual lab tests to back up assertions – is motorcycle armor, which is usually constructed of foam or hard plastic with foam laminate on the inside, or hard foam plates designed to protect the shoulders, elbows, and knees. Motorcycle armor was specifically designed to increase the chances of survival in an accident.

In the U.S., unlike in Europe, there remain no actual regulations or certification bodies to verify manufacturer safety claims for rider protective apparel such as jackets, pants, boots, and gloves. While helmets must at least meet DOT standards, it is more of a free-for-all in the realm of gear to protect the rest of the rider’s body.

Some gear makers that sell their goods in the European market do test their goods to the CE standard and make claims accordingly. However, just because a protective piece does or does not have CE protection is no guarantee of its ultimate efficacy. Further, we’ve seen some brands that do not jump through the hoops of verifying by Euro standards, but base their designs on actual race experience, and having seen what holds up and protects riders after a crash.

In all, choosing gear in the U.S. is more a case of caveat emptor, but without a doubt the gear has come a long way.

The Evolution of Safety Laws

In 1966, the Highway Safety Act required states to pass mandatory helmet laws in order to receive federal highway funding. In that same year, the American National Safety Standard for Motorcycle Helmets was introduced, which set obligatory performance standards that manufacturers were required to meet. However, Congress withdrew this requirement in 1975, and as a result, many states repealed their mandatory helmet laws. Now mandatory helmet laws now vary from state to state.

Beyond gear, the other development in rider safety is formal instruction on how to better control the bike.

The Hurt Report, published in 1981, showed that most accidents involving a motorcycle occurred as a result of car drivers failing to see motorcycles. The study also showed that helmets significantly reduced the chance of death or debilitating brain injury. The MAIDS (Motorcycle Accidents in Depth Study) Report, published in 2000, showed that motorcycles were “over-represented” in traffic accidents, and that most motorcycle accidents involved collision with a passenger vehicle.

These studies have left organizations like the Governors Highway Safety Association to encourage the implementation of helmet laws and motorcycle operator training. Many states require testing for a separate motorcycle operator’s license before they can ride on a public highway.

The Future of Motorcycle Safety

Motorcycle safety gear has grown dramatically in sophistication over the last century — full airbag suits, durable materials, and even virtual heads-up displays are being developed to increase the safety and survivability of the motorcycle enthusiast. But technology can only go so far. Just as important as gear is the training, awareness, and skill needed to stay safe on a motorcycle.

Noble McIntyre is the senior partner and owner of McIntyre Law, and an experienced Oklahoma Motorcycle Accident Lawyer.


How dangerous are motorcycles, really?

by JeffAugust 1, 2012 Features

We’re posting this infographic without comment. It was authored by Sutliff & Stout, personal injury attorneys and sent to us by Austin, Tx. SEO firm, Tasty Placement. To view the original post, check out the original Motorcycle Accident infographic. Is there any part of these stats you would take issue with? Is this a fair [...]

Read the full article →

Christmas tree carried on motorcycle

by JeffDecember 25, 2011 Features

We don’t know these guys, but they look like they had an adventurous time fetching that cut tree for the holiday. Odds are the Motorcycle Safety Foundation would not recommend this … To those of you who celebrated Christmas today, we hope you had a good day as well!

Read the full article →

Extending the Riding Season with Good Riding Gear

by JeffDecember 13, 2011 Features

Riding this time of year can be downright painful. Depending on where you live, the commute to work can easily dip into sub freezing temps, and longer rides can lead to unexpected encounters with rather severe weather. I had one such encounter a couple of years ago while riding through Texas. I had ridden my [...]

Read the full article →

Nolan N104 Modular Helmets – A Big Improvement Over the N103

by JeffOctober 19, 2011 Features

The Nolan N104 Modular Helmet is the next generation of modular helmets offered by Nolan Helmets. The N103 had been popular for riders who wanted a flip up helmet design, and the new N104 has some new features that will make it an even better choice.  The new Nolan N104 features a new chinbar design [...]

Read the full article →

2011 RaceTech Big Piston Fork (BPF) kits

by JeffJuly 12, 2011 Features

Race Tech announced custom fork setup for Showa’s Big Piston Forks. Race Tech’s newest Fork Gold Valve Kits are for the Showa BPF forks found on the new 2011 Kawasaki ZX-10R and Harley-Davidson XR1200 (FMGV S3901C), and the 2011 Suzuki GSX-R600 (FMGV S3701C). The stock BPF design has an oversized, yet very restrictive singular piston [...]

Read the full article →

2011 RaceTech Suspension Upgrade Review

by JeffJune 27, 2011 Features

We evaluate RaceTech’s high-performance motorcycle springs, Gold Valves, and personalized tuning and rebuilding service. By Jeff Cobb Motorcycle Safety News Any rider who wants more safety, control – and fun – can easily benefit from suspension tuning for his or her body weight and riding style. This is true whether you buy a new motorcycle, [...]

Read the full article →

Motorcycle Safety Primer

by JeffJune 15, 2011 Features

The ABCs of surviving all that fun Originally written for and published last week by By Jeff Cobb Motorcycle Safety News Motorcycling has always been about fun and without a doubt it can be a blast, but it’s not a video game, or a trip to an over-safety-engineered amusement park. Like a lot of [...]

Read the full article →

Arai Corsair V Nicky-3 Stars Helmet now available

by JeffJune 7, 2011 Features

From Competition Accessories: Arguably one of the best helmets ever produced, the Arai Corsair V is now available in a hot new graphic: the Arai Corsair V Nicky-3 Stars Helmet. The Arai Corsair V is the helmet of choice for top riders and you can see the graphic in action on Sunday’s MotoGP races. The [...]

Read the full article →

Think Bike in UK has it right

by JeffMay 9, 2011 Features

This video is a half decade old, but these issues are the same now as they were then. Increasing awareness for riders, and drivers in their cars and trucks is quite progressive. Strategically placed signs show these people do what they advocate: “Think.”

Read the full article →

MIC Testifies in Favor of Legislative Solution to Stop the Lead Ban

by JeffApril 9, 2011 Features

IRVINE, Calif., Apr. 7, 2011 – Republicans and Democrats agreed with Motorcycle Industry Council’s (MIC) General Counsel Paul Vitrano, who testified at a Congressional hearing today that Members of Congress should quickly pass legislation to stop the ban on youth-sized all-terrain vehicles (ATVs) and motorcycles caused by the unintended consequences of the Consumer Product Safety [...]

Read the full article →